Customer installation Home / Products / Efficient and energy-saving data center V-shaped stainless steel dry cooler

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Efficient and energy-saving data center V-shaped stainless steel dry cooler

Availability:
Quantity:
  • non-standard customization

  • WKDL

  • 5954954

Adiabatic dry cooler provide a smart way to take advantage of free cooling when surrounding temperature allows for it. They are made with cross-fin copper tubes or stainless steel tube and corrugated aluminum fins, resulting in a combination of compact dimensions and high capacity.

Dry cooler can be easily integrated with liquid-cooled plate heat exchangers, especially in free cooling systems.

Adiabatic dry coolers were designed to achieve an optimized exchange of thermal energy between air and a refrigerant or fluid. In order for dry cooler to work, the air temperature needs to be cooler than water in the system. To cool the system liquid, hot process liquid flows through the dry cooler tubes. The liquid is then cooled by the relatively cold ambient air that is forced through the coil.

The core of our air heat exchangers is the fin coil, built from a circuit of interconnected tube serpentines and fins to increase the heat exchanging surface.

25.jpg 26.jpg
IMG_0973.JPG 27.jpg

Application scenarios

Dry coolers are used in multiple buildings types and applications throughout the HVAC industry, including the following:

Data centers

Office buildings

Hospitals/medical office buildings

Industrial/process systems

Heat transfer/recuperation

Power generation

Induction cooling

Steel Industry -- Electrical Arc Furnace / induction furnace cooling

Refinery & petrochemicals -- Reactor column cooling

Rubber -- Roller cooling

Independent Power Stations -- Cooling of engine jacket water, lube oil and inter-stage cooler

Plastics -- Cooling of injection molding machine

Textiles -- Condensation of process vapour

Refrigeration / Air conditioning -- as condenser for air cooled chillers

Power Industry -- Turbine lube oil cooler / turbine intercooler

We offer tailor made service. If you any non standard model requirement, send us your requirement, we could calculate with software for you.

Customer Case

28       29

       _20241101125947

Our heat exchange coil has been exported to USA, Canada, UK, Germany, Switzerland,New Zealand, Russia,Australia, South Africa etc.

FAQ

1.Do you offer tailor made service ?

Yes, we can custom made according to your special requirements.

2.What is your delivery time?

20---30days.

3.What are the payment terms?

30% T/T before production and balance before shipment

4.What is your warranty?

One year for the whole unit.

5.What is the valid time of the quotation?

One month.

6.Can we do our OEM logo?

Yes,we can do OEM logo for you.

7.Can you do our country plug?

Yes,we can do the plug according to your request without extra cost.

Product Details
3

Fin

Fin material:ALMG, epoxy coated, copper, 304 and 316 stainless steel, aluminum etc.

Fin Pitch: 4.5mm, 7mm, 10mm, 12mm and more (tailor made)

We have different fin types for choice, if you need special type, we can open mould and tailor made for you.

4

High Efficiency Tube

Material: Copper

Tuber OD: 5/8''

Inside type: Inner grooved tube

Advantages: Increase inside heat exchange areas of tube  and intensity of refrigerant. At least 15% heat transfer  efficiency increased.

5

High Strength Tube

Material: 304 or 316L stainless steel

Tube OD: 5/8'', 19mm

Test pressure: 5.0Mpa

Expanding pressure: 40Mpa

Advantages: Running more safety, Better corrosion resistance, Good welding quality.

a3f90ca2bd650b99588cc8704c9ca8f

Axial Fan

Blade material: Aluminum or stainless steel or Nylon

Casing material: Stainless steel or Galvanized steel

Motor voltage: According customer's requirement

Bearing: NSK or SKF

Protection Grade: IP55

Original: China good brand /Ziehl-abegg

IMG_0973

EC Fan

Blade material: Coated steel or Aluminum

Grille material: Coated steel or Stainless steel

Advantages: Lower noise, Large air volume,Saving  room space, Energy efficiency Erp2015

Original: Germany Ziehl-abegg.

Tailored made servic

Our evaporator coil can be tailored made according to customer’s exact requirement. We can calculate cooling capacity based on your specification with the software, which is from Germany.

2.png1.jpg

Advantage of WKDL Adiabatic Dry Cooler

1. Modular designs of dry cooler helps in space optimization

2. High efficient fin to tube heat exchanger

3. Zero water wastage : as it is closed loop operation and now water evaporation

4. Negligible maintenance cost : as water treatment, makeup water and replacement of fills are not required.

5. No periodic cleaning requirement

6. Separates process side from any contamination due to closed loop system

7. Casing made of galvanzied steel, enhanced corrosion resistance.

FAQ

1.Do you offer tailor made service ?

Yes, we can custom made according to your special requirements.

2.What is your delivery time?

20---30days.

3.What are the payment terms?

30% T/T before production and balance before shipment

4.What is your warranty?

One year for the whole unit.

5.What is the valid time of the quotation?

One month.

6.Can we do our OEM logo?

Yes,we can do OEM logo for you.

7.Can you do our country plug?

Yes,we can do the plug according to your request without extra cost.

Our factory

1

Jiangsu Victory Hot-Cooling Technology is a Manufacture + Technical Design company with over 15 years experience.

Our main products are as below :

* Heat exchange coil in all types

* Evaporator & air cooler ; condenser

* Evaporative condenser / cooling tower

21.jpg 22.jpg
Semi finished product production workshop
23.jpg 24.jpg
Finished product assembly workshop

Contact:  Lucy Zhang

wechat / whatsapp: 0086 15961187579

Production Process

12.jpg 13.jpg
Punching fins Perforated tube
14.jpg 15.jpg
Hydraulic expansion tube Stainless steel automatic welding
16.jpg 17.jpg
Test water and maintain pressure laser cutting
18.jpg 19.jpg
BendBend Final assembly

Packing & Delivery

15129.jpg

Size

Depends on evaporator size

Weight

50kg-500kg

Packaging Details

The normal package is wooden box(Size: L*W*H). If export to European countries,the wooden box will be fumigated.If container is too heavy,we will use PE film for packing or pack it according to customers special request.

Certifications

.jpg


Previous: 
Next: 
Our main products include Air Cooler,Blast Evaporator,IQF Tunnel Coil, Baudelot Cooler, Air Cooled Condenser, Dry Cooler and evaporative condenser etc industrial refrigeration equipment.

Quick Links

Products

Contact Us
  No. 2, Xinyuan Road, Caoqiao Industrial Park, Changzhou, Jiangsu, China
  lucyzhang627@163.com
  +86-519-86218689
  +86-519-86211563
  +86-15961187579
Copyright © 2022 Jiangsu Victory Hot-Cooling Technology Co., Ltd. All Rights Reserved.  Technology by leadong.  Sitemap